Ferrule Set Manufacturer
NPTLOK ferrule set consists of one front ferrule and one rear ferrule, which offer a metal-on-metal seal. They are available in stainless steel 304, 316, brass, or special materials including Monel, Alloy, and so on.
NPTLOK ferrule set is available in standard fractional size and metric size. They are made of polished surface treatment. They are easy to install, disconnect, and retighten.
NPTLOK ferrule set provides a stable connection, which reduces the potential leak and ensures consistent flow rates.
Size: 1/8”-1 1/2” (3mm-38.1mm)
دما: -255℃-649℃
Pressure: depending on material, thickness, and the size.
- Ferrule Set Datasheet
- گواهینامه ایزو ۹۰۰۱
- ام تی سی
- EAC1
- EAC2
- EAC3
- EAC4
- EAC5
Hardening Treatment On Ferrule Set
Our factory makes hardening treatments on ferrules to strengthen the pressure of the ferrule set, which ensures a leak-free sealing. Hardening treatments on ferrules can also improve corrosion resistance.
We can send samples of ferrule sets for you to check the pressure and corrosion resistance.
Mark Part Number On Ferrule Set
Our factory offers a service that marks the part number on ferrules, which can track the information for the aftersale service.
Marking the part number on ferrule sets will not influence the leak-free and pressure of ferrules.
We do not charge the cost of marking the part number on ferrules.
How To Choose Ferrules According To The Tubing Type
If you buy فرول دوتایی including front ferrule and back ferrule, the tubing should be polished. The فرول دوتایی is not suitable for the blank tube. The sealing is not good.
If you use the blank tube, it is advised the single ferrule, which sealing is good for the blank tube.
It is very important to choose ferrules (فرول دوتایی or single ferrule) according to tubing type. If you mistake the ferrules and tubing type, the loss will be big.
محصولات مرتبط
No
If there are ferrules in stock, no MOQ. If there is no stock, the MOQ for production is 50 sets.
بله
بله
