NPTLOK Manifold Valve
NPTLOK manufactures manifold valves for more than 20 years
- Focus on the quality
- 成熟した技術
- 圧力テストレポート
- 競争力のある価格
NPTLOK Manufacturer Of Manifold Valve
NPTLOK manufactures manifold valves for more than 20 years with good quality and competitive prices.
NTPLOK has 3 manifold valve types: 2方マニホールドバルブ, 3方マニホールドバルブ, 、 そして 5-way manifold valve. Manifold valves are shut-off devices, which are designed for the removal of the attached removal.
NPTLOK manifold valves are for use in instruments, remote mount, direct mount, and module systems.
NPTLOK body materials options are stainless steel, carbon steel, and duplex stainless steel. The packing materials of the manifold valve are PTFE or Grafoil.
Choose manifold valves following your requirements.
This 2方マニホールドバルブ integrates three devices of cut-off, calibration, and vent, with a compact structure and fewer leaky joints. The pressure gauge or pressure sensor can be connected to this manifold valve. The thread can be PT, NPT, G, ZG, or R up to the customer’s requirements.
The pressure is able to reach 10000PSI
The material is stainless steel 304, or 316
The temperature: -70℃-240℃(stainless steel)
This 2-way manifold valve integrates three devices of shut-off, calibration, and vent, with a compact structure, which can be directly fixed on the transmitter, reducing the leakage of joints.
The pressure is able to reach 10000PSI
Out diameter of piping: ∅14
The material is stainless steel 304 or 316
The temperature: -70℃-240℃(stainless steel)
This 3-way manifold valve can be directly fixed on the transmitter to introduce the signal from the pressure point into the positive and negative measurement room of the differential pressure transmitter so that the pressure point can be connected or disconnected from the measurement room.
The pressure is able to reach 10000PSI
The material is stainless steel 304, or 316
The temperature: -70℃-240℃(stainless steel)
This H-type manifold valve is installed with the 1151 series capacitive differential pressure transmitter, which is used to introduce the signal from the pressure point into the positive and negative measurement room of the 1151 series differential pressure transmitter so that the pressure point is connected or disconnected from the measurement room. Direct connection to the transmitter via flange
The material is stainless steel 304, or 316
The temperature: -70℃-240℃(stainless steel)
This 3-way manifold valve is designed with reference to the 3-way manifold valve in Singapore. It has a compact structure, good sealing performance, and is easy to install and use. The manifold valve has its own adjustment hole, which can be directly fixed on the installation bracket to facilitate folding. The thread can be PT, NPT, G, ZG, or R
The pressure is able to reach 10000PSI
The material is stainless steel 304, or 316
The temperature: -70℃-240℃(stainless steel)
This 5-way manifold valve can be installed on the pulsation pipe of the remote transmission of the flow meter. It consists of two pressure-taking valves, one balance valve, and two discharge, cleaning, and verification valves, which are convenient to establish the instrument control loop. Two drain valves allow the meter to drain any corrosive fluids without removing the meter from its mounting position
The pressure: 40Mpa
The temperature: -20℃-440℃(35# steel)
製品特集ボックス
The drain, vent, and test functions of manifold valves are colored red, the isolate/block is blue, and the equalization valves are green.
The manifold valve pressure rating is up to 10000psi. The pressure rating rang is from 3000psi to 10000psi.
The locking nut is able to prevent the manifold valve from loosening and can be checked and fixed at any time.
NPTLOK offers OEM service. It is available to print your logo on the manifold valve to create your own brand for free.
Manifold Valve With Color-coded Functions
Stainless steel manifold valves provide block and isolate valves, which are all on a single valve. Manifold valve operations determine the block and the isolated valves. How to distinguish the block and isolated valve in a single valve?
2-way, 3-way, and 5-way manifold valves are designed with color-coded functions. The test, drain, and vent functions are red color code, the equalization valves are green, and the block/isolate is blue.
High Pressure Up To 10000psi
NPTLOK manifold valve pressure rating is from 3000psi-10000psi. Each valve is tested before delivery.
Contact me for the pressure test report of manifold valves.
Small And Compact Size
NPTLOK manifold valve is designed for small and compact sizes to suit the confined space, and it is easy to install and maintain. A simpler design of manifold valves is to reduce the installation cost.
Print Logo For Free
NPTLOK offers service for OEM, and you can require to print your logo on the manifold valve to create your own brand. NPTLOK uses laser technology to print information on the manifold valve.
However, NPTLOK refuses to print ” Swagelok” ” Parker” or other unauthorized brands on the manifold valve.
Customized Manufacturing Service
NPTLOK has state of art facilities and workers who have more than 10 years in operating lath. NPTLOK not only manufactures regular-size manifold valves but also offers OEM services as per your requirement.
NPTLOK accepts your drawings of manifold valves and checks whether we can manufacture them. And you can also courier us your sample of manifold valves to check it.
With mature technology and competitive price, our customized manifold valves will save costs for your company.
Difference Between Direct Mounting And Remote Mounting Manifold Valve
The manifold valve is directly mounted to the pressure instruments. Threaded connectors and flange are used in direct mount valves.
Advantages of direct mounting manifold valves:
- Less installation cost
- Integrated valves
- Fewer leak points
Remote/indirect mounting allows the manifold valve to be installed away from the instruments. The pipe is used to connect pressure instruments to the manifold.
Advantages of remote mounting manifold valves:
- Easier installation
- Uses the standard instrument manifolds
- Uses tube fittings
Manifold Valve Applications
Instrumentation Manifold Valves
- Manifold Valve Functions
- Catalog of manifold valve
- Download catalog of manifold valves
NPTLOK manifold valve function is to isolate the fluids from upstream to isolate process media from pressure instrumentation.
If you need more catalog details of manifold valve, feel free to contact me.
Download catalog of manifold valvesマニホールドバルブカタログ—NPTLOK
関連製品
Advantages of using a manifold valve
Manifold valves are used in many conditions from small mobile machines to heavy industrial plants. Below are the benefits of using a manifold valve:
- Shorter flow paths that minimize pressure heat and drop
- Simpler compact design which reduces installation costs and suits confined spaces.
- Fewer connections which reduce oil leak
- Less cumbersome hoses and fluid connections improve the overall layout.
Yes. Please courier us your sample, and our technician will check it and make drawings for your confirmation.
10 pcs to produce manifold valves
The pressure can reach 10000 psi
はい
はい
